Orien FS50IMOD Manuel d'utilisateur télécharger pdf (Page 17)

Ice-

harvesting

stage

Operation

Final Check List before Operation

1. Have all packing materials and tape been removed from the interior and exterior of the ice

maker?

2. Did you clean the ice storage bin?

3. Have the installation instructions been followed, including connecting the machine to water and

electricity?

4. Has the machine been leveled?

5. Is the ice maker in a site where the ambient temperature is between 45°F (7°C) and 110°F

(43°C) and the water temperature within 41°F (5°C) and 90°F 32°C) all year round?

6. Has the water supply pressure been checked to ensure a minimum of 15 psig with a static

pressure not to exceed 80 psig?

7. Is there a clearance of at least 2/5

″

at the rear, and 1” at the top and 1⁄5

″

at the sides for proper

air circulation?

8. Has the power supply voltage been checked or tested against the nameplate rating? And has

proper grounding been installed for the ice maker?

9. Is the ice maker plugged in?

10. Have you turned on the main water supply and the tap?

11. Have you checked for leaks at all water supply connections?

Operating Method

1. Turn on the water tap and let the water trough fill. Then set the Power switch on the front

panel to the ON position. The ice maker will start working automatically.

Cold

preservation

stage

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 54 55

Pas de commentaire

Orien FS50IMOD Manuel d'utilisateur Page 17